HP Intelligent Infrastructure Analyzer Software Licenses - Manual (Page 24)

◦ Click Delete to delete the selected searched events.
◦ Click Clear to clear the data entered to search.
◦ Click Back to go back to the SAN Event Logs page.
Figure 12 Diagnostic log – Advanced search
Configuration
The Configuration page allows you to configure the following:
•
Notifications
•
Reports
•
Account Management
•
Licensing
Notifications
This page allows you to provide the configuration settings for e-mail notifications.
To configure the Notification page:
1.
Under Event Severity, select the events that you would prefer to be notified for. The options
are:
•
Informational
•
Warning
•
Major
•
Critical
2. Under Email Server Settings enter the details accordingly:
•
In the SMTP Server section, select the Enable check box to get notifications and uncheck
to disable e-mail notifications.
Enter the mandatory fields:
◦
Server Name or IP Address – Name of the e-mail server.
◦ Port – Port 25 is the default SMTP port number for sending e-mails.
3. Enter Sender Email address (mandatory) – E-mail address of the sender.
4. Enter Receiver Email address (mandatory) – E-mail address of the person to be notified of task
activity and errors.
5. Click Save.
You can verify your Notification configurations by entering the data under Send a test message
using the e-mail configuration:
1.
To
2. Subject
24 Using HP IIAS