HP ProLiant SL390s G7 Server - Manual (Page 33)

Hardware options installation 33
4. Remove the PCI riser cage.
5. Remove the expansion slot cover.
6. Install a low-profile expansion board.
7. Install the PCI riser cage.
8. Connect all necessary internal cabling to the expansion board. For more information on these cabling
requirements, see the documentation that ships with the option.
9. Install the server into the chassis (" Installing the server into the chassis " on page 21 ).
10. Connect the peripheral devices to the server.
11. Power up the server (" Powering up and configuring the server " on page 23 ).