HP ProLiant SL390s G7 Server - Manual (Page 32)

Hardware options installation 32
3. Remove the server from the chassis (on page 15 ).
4. Open the DIMM slot latches.
5. Install the DIMM.
6. Install the server into the chassis (" Installing the server into the chassis " on page 21 ).
7. Connect the peripheral devices to the server.
8. Power up the server (" Powering up and configuring the server " on page 23 ).
Expansion board options
The server supports PCI, PCI-X, and PCI Express expansion boards.
Installing a low-profile expansion board
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15 ).