HP StoreEver MSL Tape Libraries - Manual (Page 35)

Figure 16 Installing an MSL4048 and tightening the captive screws
.
Replace tape cartridges and magazines in the Library.
Relocating tape drives
The Extender is installed in the bottom half-height drive bay of the upper Library and the top half-height
drive bay in the lower Library. If a tape drive is installed in either of these drive bays, relocate the
tape drive to another drive bay.
1. Verify that the Library is powered off.
2. Loosen the blue captive thumbscrews on the tape drive as shown in Figure 17 , page 35.
Figure 17 Tape drive thumbscrew locations
.
HP StorageWorks MSL Library Extender user guide 35