HP StorageWorks XP Remote Web Console Software - Manual (Page 96)

Table 12 LUN Manager Spreadsheet Format
Function Tag
[LDEV] [LUN] [WWN] [HostGroup] [Port] [Cha] Column
Ldkc Port Port Port Port Cha 1st
Cu Group Id Group Id Group Id Security Switch PcbMode 2nd
Ldev LunId WWN Group Name AL-PA Blank 3rd
Cmd Dev Ldkc Nickname Host Mode Fabric 4th
Cmd Sec Cu Blank Option[0:31] Connection 5th
Blank Ldev Option[32:63] Channel speed 6th
Blank Blank Option[64:95] Blank 7th
Blank 8th
Blank 9th
Blank 10th
Ldkc Port Port Port Port Cha 11th
Cu Group Id Group Id Group Id Security Switch PcbMode 12th
Ldev LunId WWN Group Name AL-PA Blank 13th
Cmd Dev Ldkc Nickname Host Mode Fabric 14th
Cmd Sec Cu Blank Option[0:31] Connection 15th
Blank Ldev Option[32:63] Channel speed 16th
Blank Blank Option[64:95] Blank 17th
NOTE: When the LUN Manager spreadsheet is exported, the settings are written up to the 10th
column (blank column).
Setting the CHA Mode
Use the [CHA] tag to set the channel adapter mode. The [CHA] tag is available only for changing
settings. You cannot add or delete the settings with the [CHA] tag definitions.
Mainframe settings are not written on the exported spreadsheet. If you are using 8 Gbps settings,
you cannot set HighSpeed for the PCB mode. When you want to set the initiator/external mix
mode for the PCB mode, set HighSpeed just as when you set the high speed mode.
“Available Configuration Values for the [CHA] Tag” (page 97) lists the available configuration
definitions for the [CHA] tag.
96 Performing LUN Manager Operations Using Configuration File Loader