Setting fibre channel authentication – HP StorageWorks XP Remote Web Console Software User Manual
Page 40
•
Windows Server 2003 SP1 or later
•
Red Hat Enterprise Linux AS 4 Update 1 or later
If you use other operating system than these, make sure that a logical volume is not larger than 2
TB. For information about the maximum value of a logical volume capacity supported by your
operating system, contact the vendor of your operating system.
To define LU paths:
1.
Start LUN Manager and display the LUN Manager window (
Selecting Icon under Fibre Folder)” (page 13)
).
2.
In the tree, select a host group.
3.
From the CU list above the LDEV list, select a CU number.
The LDEV list displays LDEVs in the specified CU image.
4.
Select a logical volume from the LDEV list. Next, from the LU Path list, select LUNs indicated
by the
icon (this icon indicates a LUN to which no LU path is defined). Next, click the Add
LU Path button.
A message appears displaying information about LU paths to be defined (
LU Paths to be Defined (in Fibre Channel Environment)” (page 40)
).
If you are using Windows, you can drag a logical volume from the LDEV list to a LUN ( ) in
the LU Path list. To drag more than one logical volume, see the HP StorageWorks
XP24000/XP20000 Remote Web Console User Guide.
When you use the LU Path list, you can use the CU list to switch between CU images.
5.
Click OK to close the message.
The settings are reflected in the LU Path list, but not applied to the storage system yet.
6.
Click Apply in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
7.
Click the OK button to close the message.
The settings are applied to the storage system and the LU paths are defined.
Figure 27 Information about LU Paths to be Defined (in Fibre Channel Environment)
Setting Fibre Channel Authentication
When configuring a Fibre Channel environment, you can use the Authentication window
(
“Authentication Window (When Selecting Fibre Folder)” (page 23)
and
(When Selecting Port Icon under Fibre Folder)” (page 26)
) to set the user authentication on host
groups, Fibre Channel ports, and Fibre Channel switches of the storage system.
40
Performing LUN Manager Operations