Requirements for the host server – HP XP Array Manager Software User Manual
Page 14

•
on page 14 shows the range that Database Validator checks when the capacity of
virtual volumes is increased by using XP Thin Provisioning Software.
Table 1 Range That Database Validator Checks When the Capacity of Virtual Volumes Is Increased
by Using XP Thin Provisioning Software
The range that Database Validator checks
Setting for Database Validator
*1
Specified range with LBA
Set to check the specified range with LBA
Whole range of increased virtual volumes
*2
Set to check the whole range of volumes (LUs)
*!
: For details about the setting of Database Validator, see the HP StorageWorks XP RAID Manager
User's Guide.
*2
: According to the increase of the capacity of virtual volumes, the range that Database Validator
checks is increased automatically.
Requirements for the Host Server
For Database Validator operations, you need a host server that is connected to the storage system
with a Fibre Channel interface. The host server requirements for HP Database Validator operations
are:
•
XP RAID Manager: 01-22-03/xx or later is required for Database Validator operations on the
storage system.
•
Operating System (OS):
• Sun Solaris version 8 and version 10. For further information on storage system operations on
the Solaris platform, see the HP StorageWorks XP Disk Array Configuration Guide for Sun
Solaris. For more information on the Solaris OS, see the Solaris user documentation or contact
Sun technical support.
• HP-UX version 11.0, version 11i v1, version 11i v2, and version 11i v3. For further information
on storage system operations on the HP-UX platform, see the HP StorageWorks XP Disk Array
Configuration Guide for HP-UX. For further information on implementing Database Validator
on HP-UX logical volumes, see
Implementing Database Validator on HP-UX Logical Volumes
.
For further information on the HP-UX OS, see the HP-UX user documentation or contact HP
technical support.
• Windows 2000 Advanced Server (Service Pack 3 or later) and Windows 2003. For further
information on storage system operations on the Windows platform, see the HP StorageWorks
XP Disk Array Configuration Guide for Windows. For further information on the Windows OS,
see the Windows user documentation, or contact Microsoft technical support.
• AIX 5L Version 5.1 ML3, and Version 5.2. For further information on storage systems operations
with the AIX platform, see the HP StorageWorks XP Disk Array Configuration Guide for IBM
AIX. For further information on the AIX OS, see the AIX user documentation, or contact IBM
technical support.
• Red Hat Enterprise Linux 4.0
•
Oracle Database:
• Oracle8i
• Oracle9i
• Oracle9i Release2
• Oracle10g Release2
Preparing for Database Validator Operations
14