HP Compaq dc5750 Microtower-PC - Manual (Page 35)

Initializing the embedded security chip
In the initialization process for Embedded Security, you will perform the following tasks:
● Set an owner password for the embedded security chip that protects access to all owner functions
on the embedded security chip.
● Set up the emergency recovery archive, which is a protected storage area that allows reencryption
of the Basic User Keys for all users.
To initialize the embedded security chip:
1. Right-click the HP ProtectTools Security Manager icon in the notification area, at the far right of
the taskbar, and then select Embedded Security Initialization.
The HP ProtectTools Embedded Security Initialization Wizard opens.
2. Follow the on-screen instructions.
ENWW Setup procedures 29