HP Scanjet N8460 Document Flatbed Scanner - Manual (Page 17)

3. In the Profile name box, type the name you want or accept the default name.
NOTE: The first 16 characters of the profile name can be displayed on the
scanner front panel. It is a good idea to include the information that distinguishes
this profile at the beginning of the profile name.
TIP: You might want to set up the new profile based on an existing one. To do
so, check the Copy settings from profile check box and select an existing profile
from the list.
4. Click Continue.
The Profile Settings dialog box is displayed.
5. Select the settings for the profile.
For more information, see the HP Smart Document Scan Software Help.
Assign profiles to quick start buttons
Use the HP Scanner Tools Utility to assign an HP Smart Document Scan Software profile
to a quick start button.
To assign a profile to a quick start button, follow these steps:
1. To open the HP Scanner Tools Utility, do one of the following:
• Double-click the HP Scanner Tools Utility icon on the computer desktop.
• Press the Tools ( ) button on the scanner front panel.
• Click Start, point to Programs or All Programs, point to HP, point to Scanjet,
point to N8400 series, and then click Scanner Tools Utility.
2. In the Program to Launch drop-down list for a button number, select HP Smart
Document Scan Software.
3. In the Profile drop-down list, select a profile.
NOTE: If you select a program other than HP Smart Document Scan Software, the
quick start button starts that program when you press the associated quick start
button.
NOTE: You can modify all profile settings except for the profile name, and the quick
start button keeps its assignment.
Choose profiles for display on the scanner front panel
Use the HP Scanner Tools Utility to choose the HP Smart Document Scan Software
profiles that are selectable from the scanner front panel.
Assign profiles to quick start buttons 15