HP Integrity NonStop H-Series - Manual (Page 55)

SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
7 -1
7
Configuring the M8521 Tape
Library for the NonStop S-Series
Server
The section covers:
Configuration Overview
You can attach the tape library (control path and data path) to a NonStop S-series
server via an IOAM enclosure. The tape library attaches to the FCSA (Fibre Channel
ServerNet adapter) in the IOAM enclosure. The ServerNet switch board on the IOAM
enclosure connects to a MSEB (Modular ServerNet Expansion Board) on a NonStop S-
series server via a fiber-optic cable.
For more information on the IOAM enclosure, see the
Modular I/O Installation and
Configuration Guide
.
Adding the Control Path and Data Path
To add the control path, issue this SCF command:
SCF> ADD SCSI $device, SENDTO STORAGE, PRIMARYLOCATION
(group, module, slot), PRIMARYSAC sac-id, LUN lun-id,
PRIMARYPORT 64-bit-portname
Example:
SCF> ADD SCSI $M8521, SENDTO STORAGE, PRIMARYLOCATION
(110,2,2), PRIMARYSAC 2, LUN 0, PRIMARYPORT 1234567891234567
Configuration Overview 7-1
Adding the Control Path and Data Path 7-1
Note.
The control path is used to control the robot, and the data path is used to control the
tape drive (M8504).
Note.
The portname numbers used in this section are examples only.
.