4 cartridge information, Handle cartridges, Inspect cartridges – HP Integrity NonStop H-Series User Manual
Page 43: Cartridge information

SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
4 -1
4
Cartridge Information
This section includes:
Handle Cartridges
Improper handling of cartridges can result in loss of data or damage to a tape library
component.
To handle a cartridge correctly:
!
Make sure the leader is latched every time you pick up a cartridge.
!
Keep cartridges clean.
!
Inspect a cartridge before each use, and never put a damaged cartridge into a tape
drive or tape library.
!
Never pull tape from a cartridge.
!
Never open a cartridge.
!
Do not handle tape that is outside the cartridge; the tape edge might be damaged.
!
Do not expose the tape or cartridge to direct sunlight or moisture.
!
Do not expose a recorded cartridge to magnetic fields; this might destroy data on
the tape.
Inspect Cartridges
A defective or dirty cartridge can damage a tape drive. Always inspect a cartridge
before you insert it into a tape drive or a tape library. Look for:
!
Cracked or broken cartridge
!
Broken leader
!
Broken leader latch
!
Damaged write-protect switch
!
Liquid in the cartridge
!
Labels not firmly or neatly attached or extending over the cartridge edge
!
Any other obvious damage