HP Integrity NonStop H-Series User Manual

Page 54

Configuring the M8521/M8521A Tape Library for the

Integrity NonStop NS-Series Server

6 -2

Adding the Control Path and Data Path

To add the data path:
1. In SCF, issue this command:

SCF> ADD TAPE $tape, SENDTO STORAGE, LOCATION (group, module,
slot), SAC sac-id, PORTNAME 64-bit-portname, LUN lun-id

Example:

SCF> ADD TAPE $M8504, SENDTO STORAGE, LOCATION (110,2,2), SAC
2, LUN 0, PORT 50060B00002E69CD

2. To start the tape drive on the server, issue this command in SCF:

SCF> START TAPE $tape

Example:

SCF> START TAPE $M8504

For complete details about the ADD and STATUS commands, including command

syntax, see the

SCF Reference Manual for the Storage Subsystem.

Note.

The LUN (logical unit number) for all Fibre Channel tape storage devices directly

attached to the NonStop NS-series server is 0.

This manual is related to the following products: