Ultrium cartridges, Apply cartridge labels, Valid labels – HP Integrity NonStop H-Series User Manual

Page 45: Figure 4-1, Ultrium cartridge components

Cartridge Information

4 -3

Ultrium Cartridges

Ultrium Cartridges

Apply Cartridge Labels

Cartridge labels reflect the cartridge media and usage. If your cartridges were not

ordered with labels already applied, you must apply them yourself. You must correctly

label all cartridges for tape library use.

Valid Labels

LTO cartridge labels have eight characters. The last two characters are the Media ID

(C1, C2, CU, L1, L2, L3, L4, or L5). CLN or DG are the first characters on the cleaning

or diagnostic label.

Figure 4-1. Ultrium Cartridge Components

Caution.

Possible misread of volume number label: Make sure the edges of the labels do not

curl. Curling causes the cartridges to stick in the tape drive loader and the robot to misread the

label.

1. Write-protect switch (data cartridge has red switch, cleaning cartridge has gray switch)

2. Volume ID label (barcode to hub side of cartridge)

3. Access door

4. Leader pin

This manual is related to the following products: