HP Integrity NonStop H-Series - Manual (Page 4)

Contents
SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
ii
4. Cartridge Information
Entering a Cartridge Through the CAP 3-1
Powering On the Tape Library 3-3
Powering Off the Tape Library 3-3
Manual Mode 3-4
Opening the Front Door (Without Power) 3-4
Securing the Front Door (Without Power) 3-5
Locate and Remove Cartridge 3-6
Insert Cartridges Into Slots 3-6
Inserting a Cartridge Into a Tape Drive 3-8
Removing a Cartridge From a Tape Drive 3-9
Removing a Cartridge From the Gripper Assembly 3-10
Replacing a Cleaning Cartridge 3-11
4. Cartridge Information
Handle Cartridges 4-1
Inspect Cartridges 4-1
Maintain Cartridges 4-2
Ultrium Cartridges 4-3
Apply Cartridge Labels 4-3
Valid Labels 4-3
Setting the Write-Protect Switch 4-6
5. Configuring the M8520 Tape Library for the NonStop S-Series
Server
Supported Connections 5-1
Adding the Control Path and the Data Path 5-1
ServerNet/DA 5-1
PMF CRU 5-2
6. Configuring the M8521/M8521A Tape Library for the Integrity
NonStop NS-Series Server
Supported Connection 6-1
Adding the Control Path and Data Path 6-1
7. Configuring the M8521 Tape Library for the NonStop S-Series
Server
Configuration Overview 7-1
Adding the Control Path and Data Path 7-1