HP Integrity NonStop H-Series - Manual (Page 47)

Cartridge Information
SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
4 -5
Valid Labels
When an audit occurs the tapes in the tape drives are not audited. Unlabeled
cartridges are not supported and will not be recognized by an audit.
Perform these steps before applying the label into the recessed area on the cartridge:
1. Make sure the cartridge has been at room temperature for at least 24 hours.
2. Clean the surface where the labels will be placed using a cleaning solution made
for this purpose.
3. Locate the type of label that you require.
4. Hold the cartridge so that the write-protect switch is toward you.
5. Attach the label to the cartridge as shown in
Figure 4-3 .
Figure 4-3. Ultrium Cartridge Label
1. Volume number label