HP ProLiant SL165z G7 Server - Manual (Page 12)

Hardware options installation 12
Optical drive option
For server-specific optical drive installation instructions, see the installation sheet included with the option
kit.
PCI I/O device option
For server-specific PCI I/O device installation instructions, see the installation instructions included with the
PCI I/O device option kit.
Fan option
For server-specific fan installation instructions, see the installation sheet included with the option kit.
Power supply options
For server-specific power supply installation instructions, see the installation sheet included with the server.
SAS or SATA power cabling options
For server-specific SAS or SATA power cabling installation instructions, see the installation sheet included
with the option kit.
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 13 ).
2. Retaining the recovery key/password (on page 14 ).
3. Enabling the Trusted Platform Module (on page 14 ).
TPM installation requires the use of drive encryption technology, such as the Microsoft® Windows®
BitLocker™ Drive Encryption feature. For more information on BitLocker™, see the Microsoft website
(
http://www.microsoft.com ).
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
• Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
• When installing or replacing hardware, HP service providers cannot enable the TPM or the
encryption technology. For security reasons, only the customer can enable these features.
• When returning a system board for service replacement, do not remove the TPM from the system
board. When requested, HP Service provides a TPM with the spare system board.