HP LD4235 41.92-inch LED Digital Signage Display - Manual (Page 28)

LAN/VOE connection
Connecting the display using LAN/VOE
▲ To connect the display to a network, plug your CAT-5 network cable into the Ethernet port.
The Ethernet cable from the display can connect to a media player/computer, a router (switch), or an
Intranet. A network connection enables the use of the Video Over Ethernet software to assign a media
player to drive the display. The connection also allows the HP Network Sign Manager program, running
on a networked media player/computer, to send command data.
Connect the Ethernet cable using one of the following connections:
● Computer Direct Connection—Connect the LAN cable to the LAN port on the display and to the LAN
port on the media player/computer (1).
● Router—Connect the LAN cable to the LAN port on the display and to a LAN port on the router (2).
● Intranet—Connect the LAN cable to the LAN port on the display and to the Intranet network via an
access point (3).
18 Chapter 5 Using the display