beautypg.com

On timer input (command: f u) – HP LD4235 41.92-inch LED Digital Signage Display User Manual

Page 101

background image

27. On Timer Input (Command: f u)

To select an external input for the current On Time setting and add a new schedule or change the existing
schedule.

Transmission

[f][u][ ][Set ID][ ][Data1][Cr]

[f][u][ ][Set ID][ ][Data1][Data2][Cr]

Data (Add schedule)

20: Input (AV)

40: Component

60. RGB

90: HDMI (HDMI1)

C0: Display Port

91: HDMI2/SDI

Data1 (Change schedule)

1. f1h to f4h (Read data)

F1: Select the 1st schedule input

F2: Select the 2nd schedule input

F3: Select the 3rd schedule input

F4: Select the 4th schedule input

F5: Select the 5th schedule input

F6: Select the 6th schedule input

F7: Select the 7th schedule input

Data2

20: Input (AV)

40: Component

60. RGB

90: HDMI (HDMI1)

C0: Display Port

91: HDMI2/SDI

* To read the schedule input, enter FFH for [Data2].

(Example 1: fu 01 60 - Move each schedule input down one row and save the 1st schedule input in RGB
mode.)

(Example 2: fu 01 f1 ff - Read the 1st schedule input.)

(Example 3: fu 01 f3 20 - Change the 3rd data schedule input to the current On Time and AV input.)

* This function is supported only when 1 (Year/Month/ Day), 2 (Hour/Minute/Second), On Time (Repeat Mode/
Time) are set.

Transmission / Receiving protocol

91

This manual is related to the following products: