Ip address, Manual configuration, Automatic configuration – HP Color LaserJet CP2025 Printer series User Manual
Page 49: Manual configuration automatic configuration
IP address
You can configure the IP address manually or automatically via DHCP, BootP, or AutoP.
Manual configuration
1.
On the control-panel menu, press
OK
.
2.
Use the
Left arrow
( ) or the
Right arrow
( ) button to select Network config., and then press
OK
.
3.
Use the
Left arrow
( ) or the
Right arrow
( ) button to select TCP/IP config, and then press
OK
.
4.
Use the
Left arrow
( ) or the
Right arrow
( ) button to select Manual, and then press
OK
.
5.
Press the
Right arrow
( ) button to increase the value for the first section of the IP address. Press
the
Left arrow
( ) button to decrease the value. When the value is correct, press
OK
. Repeat this
process for the other three sections of the IP address.
6.
If the address is correct, use the
Left arrow
( ) or the
Right arrow
( ) button to select Yes, and
then press
OK
. Repeat step 5 for the subnet mask and default gateway settings.
-or-
If the IP address is incorrect, use the
Left arrow
( ) or the
Right arrow
( ) button to select No,
and then press
OK
. Repeat step 5 to establish the correct IP address, and then repeat step 5 for
the subnet mask and default gateway settings.
Automatic configuration
NOTE:
Automatic is the default Network config. TCP/IP config setting.
1.
On the control-panel menu, press
OK
.
2.
Use the
Left arrow
( ) or the
Right arrow
( ) button to select Network config., and then press
OK
.
3.
Use the
Left arrow
( ) or the
Right arrow
( ) button to select TCP/IP config, and then press
OK
.
4.
Use the
Left arrow
( ) or the
Right arrow
( ) button to select Automatic, and then press
OK
.
It might take several minutes before the automatic IP address is ready for use.
NOTE:
To disable or enable specific automatic IP modes (such as BOOTP, DHCP, or AutoIP), use
the embedded Web server or HP ToolboxFX.
ENWW
Configure the product on the network
39