HP P2000 G3 MSA Array Systems - Manual (Page 70)

70 LED descriptions
MSA2000 3Gb 3.5” 12-drive enclosure
Table 18 LEDs — HP MSA2000 3Gb rear panel
LED Description Definition
1 Power supply LEDs See Power supply LEDs on page 71.
2 Unit Locator Off — Normal operation.
Blinking white— Physically identifies the expansion module.
3 SAS In Port Status Green — Port link is up and connected.
Off — Port is empty or link is down.
4 OK to Remove Not implemented.
5 Fault/Service Required Amber — A fault has been detected or a service action is required.
Blinking amber — Hardware-controlled powerup or a cache flush
or restore error.
6 FRU OK Green — Expansion module is operating normally.
Blinking green — System is booting.
Off — Expansion module is not OK.
7 SAS Out Port Status Green — Port link is up and connected.
Off — Port is empty or link is down.
0 0
1 2
4 3 5 6 7
1