Rear panel components, D2700 6gb drive enclosure – HP P2000 G3 MSA Array Systems User Manual
Page 19
HP P2000 G3 FC MSA System User Guide
19
Rear panel components
P2000 G3 FC MSA System SFF and P2000 G3 FC MSA System LFF
IMPORTANT:
See
Connecting to the controller CLI port
for information on enabling the controller
enclosure’s USB Type B CLI port.
Drive enclosures attach to the controller enclosure for the purpose of expanding storage capacity. Drive
enclosures supported by the P2000 G3 MSA System controllers are described in the following sections.
The 3Gb drive enclosures supported by the newer controller enclosures are listed for customers upgrading
existing legacy systems.
NOTE:
For optimal performance, 6Gb P2000 G3 MSA System controller enclosures should be cabled to
6Gb P2000 G3 MSA System drive enclosures when expanding storage capacity.
D2700 6Gb drive enclosure
P2000 G3 MSA System controllers support D2700 6Gb drive enclosures. For information about
P2000 G3 MSA System products, visit
. Select Related products, select
your drive enclosure, select Support > HP Support & Drivers from the right side of the page, select your
product name, and select Manuals.
1
AC Power supplies
2
Controller module A
3
FC ports: host interface or replication
4
Reserved for future use
5
CLI port (USB - Type B)
6
USB - Type A port: reserved for future use
7
Network port
8
Service port (used by service personnel only)
9
Disabled button (used by engineering only)
10
SAS expansion port
11
Controller module B
12
DC Power supply (2) — (DC model only)
13
DC Power switch
SERVICE
FC 2
FC 1
CACHE
CLI
CLI
HOST
8G
2,4G
8G
2,4G
SERVICE
FC 2
FC 1
CACHE
CLI
CLI
HOST
8G
2,4G
8G
2,4G
6Gb/s
6Gb/s
ACT
LINK
ACT
LINK
1
3
5 7
:
1
=
4 6
8
w
;
2
9