HP ProLiant ML350p Gen8 Server - Manual (Page 26)

Operations 26
6. Remove the air baffle.
Install the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1. Install the air baffle.
2. Install the access panel (on page 24 ).
3. Do one of the following:
o For tower models, install the bezel.
o For rack models, if removed, install the security bezel (on page 21 ).