Post problems flowchart – HP ProLiant BL25p Server-Blade User Manual
Page 87
Troubleshooting
87
POST Problems Flowchart
Symptoms:
•
•
•
•
•
Server does not complete POST
NOTE: The server has completed POST when the system attempts to
access the boot device.
Server completes POST with errors
Possible Problems:
Improperly seated or faulty internal component
Faulty KVM device
Faulty video device
Item Refer
to
1
"POST Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website
).
2
"Video Problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
).
3
KVM or RILOE documentation
4
"Loose Connections (on page
5
Server maintenance and service guide, located on the
Documentation CD or the HP website
6
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
7
•
"Hardware Problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP webs
).
•
Server maintenance and service guide, located on the
Documentation CD or the HP website
(
)