HP ProLiant BL25p Server-Blade - Manual (Page 26)

26 HP ProLiant BL25p Server Blade User Guide
To install the component:
1. Remove the processor blank and 1P enabler board.
CAUTION: Always install a processor or 1P enabler board in
processor socket 2. If processor socket 2 is empty, the server blade will
not boot.
2. Install the processor.
CAUTION: Be sure that the processor socket locking lever is
open before installing the processor into the socket.
CAUTION: The processor is designed to fit one way into the
socket. Use the alignment guides on the processor and socket to
properly align the processor with the socket. Refer to the server blade
hood label for specific instructions.