HP ProLiant BL25p Server-Blade - Manual (Page 31)

Hardware Options Installation 31
DIMM Slots Memory Bank
7-8 Processor 2 Memory Bank 2
Installing DIMMs
To install the component:
1. Power down the server blade (on page 18 ).
2. Remove the server blade (on page 18 ).
3. Open the DIMM slot latches.
4. Install the DIMM.
To remove DIMMs, reverse the installation procedure. For DIMM slots 1 and 2,
remove the air baffle, if necessary. Refer to the instructions located on the air
baffle.
IMPORTANT: For DIMM slots 1 and 2, remove the air baffle, if
necessary.