beautypg.com

Server blade power-on problems flowchart – HP ProLiant BL25p Server-Blade User Manual

Page 85

background image

Troubleshooting

85

Server Blade Power-On Problems Flowchart

Symptoms:








The server does not power on.

The power on/standby LED is off or amber.

The health LED is red or amber.

NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.

Possible causes:

Improperly seated or faulty power supply

Loose or faulty power cord

Power source problem

Power on circuit problem

Improperly seated component or interlock problem

Faulty internal component

Item Refer

to

1

Server user guide or setup and installation guide, located on
the HP website (

http://www.hp.com/products/servers/proliant-

bl/p-class/info

).

2

"General Diagnosis Flowchart (on page

83

)"

3

"Loose Connections (on page

79

)"

4

Power Calculator on the HP website
(

http://www.hp.com/go/bladesystem/powercalculator

).

5

HP BladeSystem Maintenance and Service Guide located on
the HP website (

http://www.hp.com/products/servers/proliant-

bl/p-class/info

).

6

Integrated Lights-Out User Guide located on the HP website
(

http://www.hp.com/products/servers/proliant-bl/p-class/info

).

7

Server maintenance and service guide, located on the HP
website (

http://www.hp.com/products/servers/proliant-bl/p-

class/info

).

This manual is related to the following products: