Configuring the server on the network, Before you begin, Server configuration worksheet – HP ProLiant DL380 G5-Storage-Server User Manual
Page 27
7.
Access the HP ProLiant Storage Server using the iLO 2 Remote Console functionality. Log on to
the HP ProLiant Storage Server with the default user name administrator and the password
hpinvent
. The HP ProLiant Storage Server Management console starts automatically.
NOTE:
When the Remote Console feature is enabled, you can get access to the storage server's
login screen.
The Integrated Lights-Out 2 port comes with factory default settings, which the administrator can change.
Administrators may want to add users, change SNMP trap destinations, or change networking settings.
See the HP Integrated Lights-Out 2 User Guide for information about changing these settings. To obtain
this guide, go to
to the servers section, and select
Server management. In the ProLiant Essentials Software section, select HP Integrated Lights-Out 2 (iLO
2) Standard Firmware.
Configuring the server on the network
Before you begin
When first powering on the storage server you need to have some configuration data readily available
to complete the
. Complete the
Server configuration worksheet
and use the data
collected to initialize the storage server.
NOTE:
Ensure you are logged into the HP ProLiant Storage Server as a local or domain administrator.
Table 5 Server configuration worksheet
Configuration Worksheet
Administrative Identity
User name
Change system administrator's user name, which is set by default to
administrator
.
User password
Change system administrator's password, which is set by default
to hpinvent.
Alert E-mail Notification
E-mail address alert sent to
E-mail address for critical, warning, or informational messages
about server status.
E-mail address alert sent from
Must be a valid, well-formed e-mail address that will appear as the
sender of server status e-mail alerts.
SMTP server name or IP
address
Must be an e-mail server on your network that supports the Simple
Mail Transfer Protocol (SMTP).
SNMP Settings (to be completed only if needed)
Contact person
System administrator for the storage server. The contact and location
will be provided to any SNMP management computer that requests
them.
System location
Any text string, such as a location or phone number. For example,
Floor #3, Financial Services Bldg
.
Community name No. 1
The community name is used for network authentication when
sending outgoing SNMP messages.
HP ProLiant Storage Server
27