HP ProLiant DL380 G5-Storage-Server - Manual (Page 24)

NOTE:
You can change the administrator name and password when you configure the server
using the “ Rapid Startup Wizard ” on page 28.
4. To complete network configuration using the Rapid Startup Wizard, see
“ Configuring the server on the network ” on page 27.
IMPORTANT:
If you are using the remote browser method to access the HP Storage Server Management console and
Rapid Startup Wizard, always close the remote session before closing your Internet browser. Closing
the Internet browser does not close the remote session. Failure to close your remote session impacts the
limited number of remote sessions allowed on the storage server at any given time.
Connecting to the storage server permits you to access the HP Storage Server Management console
( Figure 2 ). From the console, you can access snap-ins that allow complete server system management.
Figure 2 HP Storage Server Management console
Using the Remote Desktop method
Remote Desktop provides the ability for you to log onto and remotely administer your server, giving you a
method of managing it from any client. Installed for remote administration, Remote Desktop allows only
two concurrent sessions. Leaving a session running takes up one license and can affect other users. If
two sessions are running, additional users will be denied access.
To connect the storage server to a network using the Remote Desktop method
1. On the PC client, select Start > Run. At Open, type mstsc, then click OK.
24 Installing and configuring the server