Planning a network configuration, Configuration checklist, Network access methods – HP ProLiant DL380 G5-Storage-Server User Manual
Page 18
Table 2 Network access methods
Access method
I.E. 5.5
or later
required?
Storage server
desktop accessible?
HP ProLiant Rapid
Startup Wizard access
Notes
Direct attachment
No
Yes
Directly from the
storage server desktop.
Requires a
monitor, mouse,
and keyboard.
Remote browser
Yes
No
Directly from the HP
ProLiant Storage Server
Management console.
Does not display
the storage server
desktop.
Remote desktop
No
Yes
Indirectly from the
storage server desktop.
Windows Remote
Desktop capability
required on client.
HP Integrated
Lights-Out 2 (iLO
2) connectivity
Yes
Yes
Indirectly from the
storage server desktop.
See the HP
Integrated
Lights-Out 2 User
Guide for server
access instructions.
Planning a network configuration
You use the Rapid Startup Wizard to configure your storage server. This wizard is displayed automatically
when you first start your system. Before you run the Rapid Startup Wizard, it is helpful to gather the
network configuration information you need, including:
•
User name and administrator password (the system provides you with defaults you need to change)
•
E-mail addresses to set up system alerts
•
SNMP settings
•
Local area network (LAN) configuration settings
To help you gather this information, see “
Configuring the server on the network
Configuration checklist
Use the following checklist to make sure you have completed all configuration tasks for your HP ProLiant
Storage Server. The steps for each task are explained in more detail in subsequent chapters of this guide.
18
Installing and configuring the server