HP StoreAll Storage - Manual (Page 40)

Example 33 Identify drive
# hpsp_spt -id 5000CCA01B4B6494 --led on
Operation completed successfully
Assigning host access
Syntax
hpsp_spt -ha
hpsp_spt --assignHostAccess
Description
Assigns host access to the volumes which are not mapped. This operation allows all volumes to
be seen by all registered HBAs.
Example 34 Assign host access
# hpsp_spt -ha
Operation completed successfully
Rescanning controllers
Syntax
hpsp_spt -rescan ['ALL' | UUID of a controller]
hpsp_spt --rescan ['ALL' | UUID of a controller]
Description
Issues a rescan to all storage controllers or an individual controller (specified by the UUID).
Example 35 Rescan
# hpsp_spt -rescan
Operation completed successfully
Viewing parity initialization status
Syntax
hpsp_spt -ps
hpsp_spt --parityStatus
Description
Identifies the enclosure specified by the UUID when the LED is turned on or off using the command
argument.
40 StoreAll 8800 storage provisioning