HP StoreAll Storage - Manual (Page 25)

Command reference and examples
Controller options
Description Option
Is a mandatory option to be used in all the commands except --help and
--version
. This option requires the controller's management interface IP as
the argument.
-ctrlIp
--controllerIp
Controller IP>
Requires the username to connect to the controller's management interface. -usr
--user
Requires the password to connect to the controller's management interface. -pwd
--password
Can be used to retrieve the controller credentials (username and password)
from the credentials manager service. -cs
--useCredentialService
This option works only if the credentials manager service is configured for the
controller IP.
NOTE: This option is hidden from the tool --help command and should
be used only by an authorized user.
Listing disk drives
Syntax
hpsp_spt -ld [ all | ]
hpsp_spt --listDrives [ all | ]
Description
Lists information for all drives or an individual drive (if the Universal Unique ID is specified). If no
argument is specified, all drives are listed.
NOTE: The all argument is case insensitive.
Example 11 List drives
[root@X9000 ~]# hpsp_spt -cs -ctrlIp 10.20.12.101 -ld
--------------------------------------------------------------------------------
# UUID Box Bay State Size(GB) Status
--------------------------------------------------------------------------------
1 1.1 1 1 GLOBAL SP 279.40 OK
2 1.2 1 2 Vdisk 279.40 OK
3 1.3 1 3 Vdisk 279.40 OK
4 1.4 1 4 Vdisk 279.40 OK
5 1.5 1 5 Vdisk 279.40 OK
6 1.6 1 6 Vdisk 279.40 OK
-----------------------------------------------------------------
SUMMARY:
--------
Free Drives : 0
Vdisked Drives : 5
Spare Drives : 1
[root@X9000 ~]# hpsp_spt -cs -ctrlIp 10.20.12.101 -ld -v
1. UUID : 1.1
Serial No. : 6XP26TAF0000B230BNNT
Location(Box,Bay) : 1, 1
Status : OK
Type : SAS
Size : 286102 MB
RPM : 10
Link Speed : 6Gbps
Spare : yes
Enclosure UUID : 500c0ff013ae833c
2. UUID : 1.2
Command reference and examples 25