Agilent Technologies N3970A - Manual (Page 34)

31
N3970A UM-1
■ PERFORMANCE TEST
Test Record
Results of the performance test may be tabulated on the Test
R e c o rd provided at the end of the test pro c e d u re. It is
recommended that you fill out the Test Record and refer to it
while doing the test. Since the test limits and setup information
are printed on the Test Record for easy reference, the record can
also be used as an abbreviated test procedure (if you are already
familiar with the test procedures). The Test Record can also be
used as a permanent record and may be reproduced without
written permission from Agilent Technologies.
Test Failure
If the Agilent N3970A fails any performance test, return the
instrument to the nearest Agilent Technologies Sales/Service
Office for repair (see page 3).
Instrument Specification
Specifications are the perf o rmance characteristics of the
instrument that is certified. These specifications, listed on page
26, are the performance standards or limits against which the
Agilent N3970A can be tested.
Any changes in the specifications due to manufacturing
changes, design, or traceability to the National Institute of
Standards and Technology (NIST), will be covered in a manual
change supplement, or revised manual. Such specifications
supersede any that were previously published.