Autotest operat i o n – Agilent Technologies N3970A User Manual

Page 17

Text mode
Original mode

■ AUTOTEST OPERAT I O N

meter with a test lead. Set the source to Autotest mode, and then
push SET REF on the meter for 3 seconds. This will store the
reference at all relevant wavelengths.

Either a ‘local’ or ‘remote’ reference can be stored.

To exit Autotest mode, either disconnect the optical test lead, or
exit Autotest mode on the light source for > 8 seconds.

Refer also to manual sections on:

■ Storing and recalling readings.