Performance test – Agilent Technologies N3970A User Manual
Page 32
29
N3970A UM-1
■
PERFORMANCE TEST
The procedures in this section test the performance of the
instrument. The complete specifications to which the Agilent
N3970A Optical Power Meter is tested are given on pages 26-28.
All tests can be performed without access to the interior of the
instrument. The test equipment given corresponds to tests
carried out with Diamond HMS-10 connectors and FC/PC
connectors on the DUT (devise under test).
Equipment Required
Equipment required for the performance test is listed in the table
on page 30. Any equipment that satisfies the critical
specifications of the equipment given in the table may be
substituted for the recommended models.