Agilent Technologies N3970A - Manual (Page 10)

7
N3970A UM-1
■ SAFETY SUMMARY
Initial Inspection
Inspect the shipping container for damage. If there is damage to
the container or Cushioning, keep them until you have checked
the contents of the shipment for completeness and verified the
instrument both mechanically and electrically.
The Perf o rmance Tests give pro c e d u res for checking the
operation of the instrument. If the contents are incomplete,
mechanical damage or defect is apparent, or if an instrument
does not pass the operator’s checks, notify the nearest Agilent
Technologies Sales/Service Office (see page 3).
WARNING
To avoid any hazard, do not perform electrical tests when there
are signs of shipping damage to any portion of the outer
enclosure (covers, panels, and so on).
WARNING
You MUST return instruments with malfunctions to an Agilent
Technologies Service Center for repair and calibration (see page 3).
Line Power Requirements
The Agilent N3970A Power Meter operates at line power when
applied to the optional external power supply N3979A 9V DC
Operating Environment
The Agilent N3970A Power Meter can be operated at
temperatures between - 10°C and + 55°C and at relative
humidity of <95%.
Storage and Shipment
The Agilent N3970A Power Meter can be stored or shipped at
temperatures between - 25°C and + 70°C and at relative
humidity of less than 95%. Protect the module fro m
temperature extremes that may cause condensation within it.
REQUIREMENT COMPLIANCE
N 10149