HP ProLiant BL685c G5 Server Blade - Manual (Page 59)

Scripted deployment 59
Parameter Description Possible Values
the command line, and
multiple bundles are in the
directory, this parameter
allows HP Smart Update
Manager to use the bundle
with the latest version for
installation.
/dryrun This argument simulates the
installation for a test run.
Nothing is installed. YES, NO
/options This parameter can be used
to specify the HP Smart
Update Manager CLI options
inside the input file and this
will override the
configuration settings.
Parameters can be separated
by a semi-colon, comma or a
space. All CLI switches
For example, OPTIONS = /f:rom,/silent
/usesnmp This argument specifies that
components, which use
SNMP protocol, are
available to be selected for
installation. These
components are available for
selection by default. When
the /usesnmp argument is
used, and the /usewmi
argument is not, the WMI
components are optional.
YES, NO
/usewmi This argument specifies that
components, which use WMI
protocol, are available to be
selected for installation.
These components are
optional by default and will
not be installed unless this
argument is used. When the
/usewmi argument is used,
and the /usesnmp argument
is not, the SNMP components
are optional.
YES, NO
/romonly This argument is a filter
switch and allows the user to
see only the firmware
components needed for
installation. Do not use the
/romonly argument with
the /softwareonly
argument.
YES, NO
/softwareonly This argument is a filter
switch and allows the user to YES, NO