Graphical deployment on a local host, Scripted deployment on a local host, Deployment to multiple remote hosts – HP ProLiant BL685c G5 Server Blade User Manual
Page 16
Firmware Maintenance CD powered by HP Smart Update Manager 16
Scenario
Description
more host systems.
Graphical deployment on a local host
To deploy components to a single local host, use the HP Smart Update Manager GUI.
1.
Ensure all minimum requirements are met as described in "Minimum requirements (on page
)."
2.
Ensure that the components to be deployed are accessible to the local host.
For information about performing the deployment using the GUI, see "Local host installations using the
GUI (on page
)."
Scripted deployment on a local host
To deploy components to a local host using the command line interface:
1.
Ensure all minimum requirements are fulfilled as described in "Minimum requirements (on page
)."
2.
Ensure that the components to be deployed are accessible to the local host.
3.
Create a script to customize the deployment. See "Scripted deployment (on page
)" for more
information.
4.
Execute the script.
Deployment to multiple remote hosts
NOTE:
A remote host can be the IP address or DNS name of a remote server, remote iLO
NIC port, Virtual Connect Ethernet or Fibre Channel Module for c-Class BladeSystem, or
BladeSystem Onboard Administrator.
To deploy components to multiple remote hosts using the GUI:
1.
Ensure that all minimum requirements are met as described in "Minimum requirements (on page
)."
2.
Ensure that the components to be deployed are accessible to the administrative system.