AGFA 2100 - Manual (Page 67)

When Test Print A can be printed, it is a nearly certain indication that
the printer is functioning properly. You can print Test Print A to see what
the current printer settings are before making changes in Menu Mode (see
Chapter 4). Table 2–2 describes the items on Test Print A, and Table 2–3
decribes how to print the test print.
Table 2–2: Test Print A
Item Description
Version This is the version of firmware the printer is using.
The firmware version number aids the Customer Services
engineer if there is a problem with the printer.
Total RAM This is the total amount of random-access memory
available in the printer. RAM is shown in kilobytes.
Font Card Lists the name of the installed font cartridges and their
location (left or right font cartridge slot).
Page Count Indicates the total number of pages printed to date.
Free RAM Indicates the total amount of RAM available. This memory
space can be used to downline load fonts from the host
computer, be reserved as bitmap pages, or used to support
options such as PostScript.
Current Settings Shows all of the setup menus and the current values in
operational memory. Each menu also shows what kind of
memory the values can be stored in: RAM only, NVRAM
only, or in either type of memory (RAM + NVRAM).
See Table 4–7 and Section 4.5 for a complete listing and
description of all the menu features.
Operating Information 2–41