AGFA 2100 - Manual (Page 113)

Chapter 5
Print Media
This chapter describes the print media that are appropriate for use with the
DEClaser 2100 printer. The types of print media described in this chapter
are paper, labels, transparencies, and envelopes.
The DEClaser 2100 printer produces excellent print quality using
electrophotographic laser technology.
The laser printing process differs
greatly from that of a conventional impact printer, and this is why paper
selection is particularly important. Because toner is bonded to the paper
as it passes through the heat and pressure rollers of the fixing unit, the
paper must be able to withstand high amounts of heat and pressure.
CAUTION: When selecting paper or other print media, always print test
samples of the paper you want to use. This is particularly important when
you are printing on chemically treated or coated paper, such as preprinted
forms or colored paper. The inks and pigments used on these papers must
also be able to withstand the high heat and pressure of the fixing unit. Be
sure to consider the heat limitations of transparencies and the glues used on
envelopes and labels. Always select print media according to the instructions
and specifications in this chapter. For a complete listing of recommended
print media and ordering information, see Appendix B.
Print quality can also deteriorate if paper is not stored properly. Read
Section 5.5 in this chapter for complete information about storing paper.
For additional information about print media, consult the Digital Laser
Printers Guide to Paper and Other Media available from DECdirect (see
Appendix B).
Print Media 5–1