AGFA 2100 - Manual (Page 172)

14. Clean the transfer corona wire and the nylon separation wires with the
cotton swab.
CAUTION: The corona wire and nylon separation wires are fragile. Do
not press down on the wires too hard or they may break.
Fig 7-38, MLO-004877
15. Remove the wire/pin cleaner from the inside of the printer.
WARNING: The fixing assembly may be hot. Be careful when removing
the wire/pin cleaner from the printer.
Fig 7-39, MLO-004873
7–30 DEClaser 2100 Printer Operator’s Guide