AGFA 2100 User Manual
Page 43
3.
Press
On Line
to place the printer off line.
— The On Line indicator shuts off.
4.
Press
Manual Feed
(once or twice) until the display reads
FEEDER = Manual.
— After about three seconds the display will read 00 READY.
— The manual feed mode selection is now stored in operating memory.
5.
Press
On Line
to place the printer back on line.
— The On Line indicator lights.
6.
Send data from the host computer to the printer.
— The Data indicator lights and the display reads PF FEED xxx
(where xxx = paper size).
7.
Adjust the manual feed guides to accept the width of the paper.
Fig 2-18, MLO-004841
Operating Information
2–17