HP Scripting Toolkit for Windows 9.60 - Manual (Page 28)

CONREP command file contents
A typical data file generated by the CONREP command is similar to the following:
originating_platform=
"ProLiant DL360 G4"
originating_family=
"P52"
originating_romdate=
"08/16/2005">
helptext=
"Current Initial Program Load device boot order">
00
01
03
02
04
ff
ff
ff
helptext=
"Lists of PCI devices and their interrupts-not displayed if default" >EMPTY_DELETE
helptext=
"Lists the current boot controller ordering">
80 86 25 a3
00
00 fa
41
0e 11 ff ff
00
00 78
c1
Using HPRCU
HPRCU is an RBSU configuration utility similar to CONREP. This utility is supported on all HP
ProLiant Gen8 servers except the HP ProLiant DL580 Gen8 server. This utility does not use a
definition XML file like the CONREP utility, but directly reads the same table that RBSU uses for
feature names and settings. All features and options are number based. Each feature and option
has a unique number.
28 Scripting Toolkit utilities