HP ProLiant DL380 Server - Manual (Page 45)

Hardware options installation 45
16. Install the two additional fans included with the processor.
You can install memory (" Installing a DIMM " on page 51 ) on the second processor. HP recommends
balancing memory between both processors for improved performance. For more information on
memory configurations, see "Memory Options (on page 46 )."
17. Install the air baffle (" Remove the air baffle " on page 29 ).
18. Install any full-length expansion boards (" Installing a full-length expansion board " on page 64 ), if
previously removed.
19. Install the access panel (on page 23 ).
20. Install the server into the rack (" Installing the server into the rack " on page 35 ).
21. Connect each power cord to the server.
22. Connect each power cord to the power source.
23. Power up the server (on page 21 ).