beautypg.com

Connecting the power cable, Electrical specifications, external drives – HP StoreEver Ultrium Tape Drives User Manual

Page 34

background image

Table 5 Electrical specifications, external drives

Ultrium 1840

Ultrium 960

Ultrium 460

Power consumption

13 Watts idle,
26 Watts typical,
40 Watts maximum

12 Watts idle,
30 Watts typical,
35 Watts maximum

11 Watts idle,
25 Watts typical,
38 Watts maximum

Power requirements

100–240 VAC
50-60 Hz, auto-ranging
0.7A maximum

100–240 VAC
50-60 Hz, auto-ranging
0.8A maximum

100–240 VAC
50-60 Hz, auto-ranging
0.7A maximum

1.

Plug the power cable securely into the socket on the rear panel of the drive.

2.

Plug the other end of the power cable into the power outlet. The power on/off switch is on the

front panel, see

Figure 13

.

1

Power cable

2

Power on/off switch

Figure 13 Connecting the power cable

34

Installing an external Ultrium tape drive