Restoring factory default settings – ADC 320F User Manual
Page 26
Setting System Configurations
18
Megabit Modem 310F and 320F User Manual
Restoring Factory Default Settings
The following table summarizes the factory default settings. The procedure restores all settings
to their factory defaults.
1
From the
System Configuration
menu (
), type
to select
Factory Default Configuration
.
The following message displays:
This will reset all the configurations
and the ADSL modem. Are you sure? (Y/N)
2
Do one of the following:
•
Type
to reset the modem. When you type
, the modem restarts with the factory
default settings in effect. The following message displays:
NVRAM Updated.
•
Type
to discontinue this procedure.
Setting
Factory Default
System
Logon Password
ATU-R Login (Megabit Modem 320F
Craft Port Access)
Enable
ADSL
Startup Mode
Adaptive Rate
Margin
4 dB
Upstream Data Rate
928 kbps - maximum
64 kbps - minimum
Downstream Data Rate
7040 kbps - maximum
64 kbps - minimum
SNR Margin Threshold
3 dB
ES Threshold
100
Alarm Severity
E, enabled as a minor alarm
Interleave
4 ns
Bridging
Bridge Aging Time
300
When you select yes to restore the factory default configuration, the modem
automatically writes the factory default values to NVRAM and resets the ADSL
link between the Megabit Modem 310F and 320F. You are automatically logged
off the modem(s) and must log on again.
ENTER
4
Y
Y
N