Acura 2010 RDX - Manual (Page 68)

The instrument panel has many
indicators that give you important
information about your vehicle. Seat Belt Reminder
Indicator
This indicator reminds you and your
passengers to fasten your seat belts.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belts, the beeper sounds,
and the indicator flashes. If you do
not fasten your seat belts before the
beeper stops, the indicator stops
flashing but remains on.
If your front passenger does not
fasten their seat belt, the indicator
comes on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
If either of you do not fasten your
seat belt while driving, the beeper
will sound and the indicator will flash
again at regular intervals. For more
information, see page
20 .
You will also see a ‘‘FASTEN SEAT
BELT ’’ or ‘‘FASTEN PASSENGER
SEAT BELT ’’ message on the multi-
information display.
Instrument Panel Indicators
64
09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu
2010 RDX