Acura 2010 RDX - Manual (Page 436)

Replacing a Front Turn Signal/
Parking Light Bulb
1. Open the hood. Remove the socket
from the headlight assembly by
turning it one-quarter turn
counterclockwise.
2. Remove the bulb from the socket
by pushing the bulb in and turning
it counterclockwise until it
unlocks.
3. Install the new bulb in the socket.
Turn it clockwise to lock it in
place.
4. Test the lights to make sure the
new bulb is working.
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Replacing a Front Side Marker
Light Bulb
1. Open the hood. Remove the socket
from the headlight assembly by
turning it one-quarter turn
counterclockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
BULB
SOCKET
SOCKET BULB
Lights
432
09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu
2010 RDX