Acura 2010 RDX - Manual (Page 56)

1. Remove the cargo area cover, and
place it on the cargo area floor (see
page
160 ).
2. (Outer seating position)
After properly securing the child
seat (see page
50 ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
(Rear center seating position)
Remove the head restraint (see
page
136 ). Make sure the removed
head restraint is secured in the
cargo area. Reinstall the head
restraint when the child seat is
removed.
After properly securing the child
seat (see page
50 ), route the tether
strap over the top of the seat-back.
When you install the child seat in
the rear center seating position,
you cannot use the seat belt
behind the driver's seat.
3. Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
4. Tighten the strap according to the
seat maker's instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
TETHER STRAP TETHER STRAP HOOK ANCHOR
Installing a Child Seat
52
09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu
2010 RDX