Avaya INDeX 11.0 - Manual (Page 5)

Redial Last Number 20AT Features – Page 5
20AT Features
Redial Last Number
Pressing the REDIAL key dials out the number of the last manually dialled call.
Changing the Caller Volume
During a call, pressing the VOLUME changes the caller volume between normal and
loud.
Message Waiting Lamp
The 20AT has a voice message waiting lamp. On systems that support message
waiting, the lamp will indicate when a message has been left. The method for
answering the message and clearing the lamp will vary according to the system that
left the message.
For the INDeX system:
To answer a message waiting lamp:
1. Lift the handset and dial *1. The system rings the extension that left the
message.
To cancel a message waiting lamp:
1. Lift the handset and dial *2. Replace the handset.
The Memory Key
The 20AT's MEMORY key can store a single number for quick dialling (ie. lift the
handset and press MEMORY). The number can be up to 21 digits.
Setting the memory number
1. Lift the handset off-hook.
2. Press
MUTE and then MEMORY.
3. Dial the number to store.
4. Press
MUTE again and replace the handset.
Recall
Some telephone systems require a recall signal to initiate special functions (refer to
your System Administrator for details). Press RECALL to send this signal.
INDeX 11.0 20AT Telephone User's Guide 20AT Features – Page 5
38DHB0002UKHB Issue 1 (10/05/2004) Redial Last Number