Aastra Telecom 800 - Manual (Page 40)

Aastra 800 Monitor Inspecting Windows Services
38
4.2 Inspecting Windows Services
The Windows services configuration is adapted accordingly to match the require-
ments of the Aastra 800 communications system. Under normal conditions, there
is no need to change this configuration.
However, for maintenance or troubleshooting purposes it may be reasonable to
check the Windows services configuration:
1. Login to Windows as user with administration rights.
2. Open the Windows control panel. Navigate to the Performance and Mainte-
nance category. Open the Administrative Tools folder. Start the Services
applet.
3. From the Services list, select the “Aastra 800 Supervisor Service” entry.
4. Verify that the service was started. You may also check if the properties page of
the service shows the Automatic setting for Startup type.